Download CockpitConnect
Everyone needs the Bridge to connect their cockpit hardware to X-Plane 12, with no cloud connection needed at runtime. The X-Plane Proxy is only needed when the Bridge runs on a different PC than X-Plane 12.
CockpitConnect Bridge
Runs on your sim PC, a second PC or a Raspberry Pi.
Available to registered CockpitConnect users, under Bridge Setup in the app.
X-Plane Proxy
Only for a Bridge on a second PC or Raspberry Pi. Run it on the PC that runs X-Plane 12. Do I need it?
Free, MIT-licensed, no sign-in needed โ source on GitHub ยท why it exists
Where to run the Bridge
Pick either setup. Your panels find the Bridge over WiFi wherever it runs, so you can move it later without rewiring anything.
On your sim PC
Needs: Bridge
The simplest start. Install the Bridge on the PC that runs X-Plane 12 and it connects to the sim by itself. Nothing else to install or configure.
On a second PC or a Raspberry Pi
Needs: Bridge + X-Plane Proxy
Keep your sim PC for the sim alone: its CPU goes to frames, and no hub full of USB boards hangs off it. X-Plane 12 only accepts API connections from its own PC, so the sim PC also runs the X-Plane Proxy, which lets the Bridge reach X-Plane 12 over your network.
- Install the Bridge on the second PC or Raspberry Pi.
- Install the X-Plane Proxy on your sim PC and run it. It listens on port 8087.
- In the app, open the workspace Settings and set the X-Plane 12 address to your sim PC's local IP address (for example 192.168.1.110) and port 8087.